We all know the warning signs. The sink takes a little longer to drain. You begin to notice that water accumulates around your feet in the shower. And the smells. Odd and unpleasant odors. All are signs that you will soon face a clogged drain. And then, one day, boom. Your drain will be completely blocked. It's something you have to deal with quickly, or face the anger of a busted pipe or useless bathroom.
Then, remove excess hair and dirt that has accumulated on the surface of the drain. And nothing happens. Try a liquid product to uncover. Not good. So, the plumber is the only option to solve the problem. But what happens when it does not come to the rescue? Here are 10 ways to unclog drain before resorting to that expensive emergency plumber for the drain uncover.
10 ways to uncover the drain
1. Bent wire hanger
A destapacaños Pretty simple, but surprisingly effective. Take a normal wire hanger and smooth it out as best you can. Then, bend one end to create a small hook. Push past the drain cover and start "fishing." You should be able to get all kinds of hair and unpleasant things out of the drain. Remember, always want to remove dirt, it is important not to push it further. When you have taken out everything you can, let the hot water run and this should fix the clogging.
2. Baking soda and vinegar
Mix 1/3 of a cup of baking soda with 1/3 of a cup of vinegar in a measuring cup. It will bubble immediately, and you should not waste time pouring it down the clogged drain. Effervescent action will help remove dirt, hair and dirt that has accumulated in the pipe. Let it sit for an hour or even overnight if you can. Rinse with hot water. Alternatively, get as much dry sodium bicarbonate as you can from the drain first, then pour the vinegar.
3. Vacuum cleaner
If you have an industrial vacuum, this drain uncovering machine It can become an excellent tool for unblocking drains. First, set it to aspirate liquids. Cover the vent to avoid a disaster. Then, create the tightest seal you can on the drain. With the vacuum activated at its highest setting, it can be powerful enough to drag the obstruction through the pipe into the vacuum bag. It doesn't always work, but it's worth a try.
4. Boiling water
Turn on the kettle (or use the stove or microwave if it does not have a kettle) and boil the amount of water it may contain. Now slowly pour it down the drain in two or three stages, allowing the hot water to take effect for several seconds between each discharge. This is usually the easiest and fastest way to unclog a drain.
5. Caustic soda
Get rubber gloves and eye protection. Caustic soda (also known as sodium hydroxide) can cause unpleasant chemical burns. You can pick up some at your local hardware store, but always be careful when handling them. Pour 4 liters of cold water into a mop bucket and then add 3 cups of caustic soda. Stir well with an old wooden spoon. It will start to bubble and warm up. Pour it into the clogged drain and leave it for 20-30 minutes, then rinse the drain with boiling water. Repeat if necessary.
6. Pipe cleaning
This is a simple plumbing job to unclog the grease traps. First, place an empty bucket under the U-shaped tube (the trap) under the sink. The bucket will collect the water that will spill. Using a plumber's wrench, loosen the sliding nuts at both ends of the pipe. You should be able to finish the operation by hand. When the trap is free, remove it and turn it upside down, emptying the contents into the bucket. You may also have to fish inside for debris, and do the same with the pipes that held it. An old toothbrush is good for removing difficult dirt. Rinse the trap with water and then reassemble it. In most cases, that will have worked.
7. Drain serpentine
This is a low tech team that works wonders. It is basically a long and flexible metal rope with a metal spiral at the end. The instructions for use come with the tool.
8. Salt and baking soda
Mix 1/2 cup of table salt with 1/2 cup of baking soda and pour through the blocked drain. Leave it for 10-20 minutes, then pour boiling water. Salt, sodium bicarbonate and boiling water will produce a chemical reaction that should dissolve some of the most unpleasant blockages.
9. Dish detergent
If your toilet is clogged, pour 1/4 cup of dish detergent into the bowl. Then boil some water. The dish soap will act as a lubricant and help break any greasy residue. Then pour the hot water and get ready to start putting your hand in the rubber gloves.
10. Baking soda, vinegar, gravity and pressure
If your bathroom drain is clogged, mix some baking soda / vinegar mentioned in tip two. Pour it down the drain, and then place the plug on it. After 45-60 minutes, fill the bathtub with water. Then, remove the cap. The pressure of 150 liters of water should be sufficient to dislodge the blockage that has been loosened with baking soda and vinegar.
Those are 10 quick and easy tips that should help you deal with the most stubborn drainage blocks. Do you have any other good advice to uncover the drain? Let us know.